Mașină de pompieri Isuzu Water Foam Powder Combined Fire Fighting Truck nouă

We production 1ton to 30tons fire fighting truck

Chengli Group is the largest special-purpose vehicle manufacturer in China. We can customize ISUZU, FOTON, HOWO, SINO, JAC, SHACMAN, DONGFENG, JMC and other brand trucks according to your needs.

6X4 ISUZU GIGA water foam fire fighting truck

Vehicle model Water foam fire truck
Outside dimensions 10500×2550×3800mm
Maximum total mass 31400kg
Water tank 6000L
Foam tank 6000L
Maximum speed 100km/h
Fire pump rated flow 60L/s 1.0MPa
Rated flow of fire monitor 50L/s 1.0MPa
Fire gun range water ≥70m Foam ≥65m
Chassis model QL5350TZZWUTDZY manufacturer ISUZU
Engine rated power 279kw (380 horsepower) engine capacity 9839ml
Engine emission standards EURO IV Drive form 6X4
Wheelbase 4565+1370mm Cab structure Single cabin with sleeping
Gearbox Manual FAST 12-speed Driver position Left hand drive
12R22.5 tire
equipment The instrument panel of the original car is equipped with a fire control panel and a control box for police lights,
and an alarm is added;
2. A power switch control switch and indicator light; 3. An additional power switch;

General layout The vehicle consists of two parts: the firefighter's cabin and the body. The body layout uses a built-in tank structure. The left and right sides are equipment boxes, the middle is a water tank, and the back of the equipment box is a pump room.

1.  Equipment box and pump room
structure The main frame structure is welded with high-quality square tubes, and the outer decorative plate is welded with carbon steel plates. The roof is non-slip and can be walked on. (Aluminum alloy square tube welding can be used according to user needs)
Equipment box The equipment boxes are located on both sides of the rear of the passenger compartment, and are equipped with aluminum alloy rolling doors with lights inside. Storage boxes are set in the equipment box room according to demand. The lower part of the side is provided with a flip pedal.
Pump room The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside, and flip pedals on the lower sides of the pump room. Insulation position: fuel heater (optional according to customer requirements)

2. Water tank
capacity 6000kg
Material 316 stainless steel
Tank fixing Flexible connection with chassis frame
Tank settings One manhole with a diameter of 460mm, with a quick locking/opening device, a DN40 water tank for the remaining water port, with a ball valve, and a water injection port: connect two DN65 ports on the left and right sides of the water tank, and the water inlet and outlet: set one Water inlet pipe to water pump, DN100 valve, pneumatic and manual control, 1 water pump to water tank filling pipe, DN65 valve, pneumatic and manual control.
 
3. Foam tank
capacity 6000L
Material 316 stainless steel
Tank fixing Flexible connection with chassis frame
Tank settings Manhole: 1 DN460 manhole, with quick lock/open, automatic pressure relief device
Overflow port: 1 DN40 overflow port
Residual liquid outlet: set up a DN40 foam tank to discharge residual liquid
Foam outlet: set 1 DN40 foam tank to pump out foam pipe.

4.  Fire pump
model Godiva CB10/60 fire pump
Hgh and low pressure pump
form Atmospheric centrifugal
Limited Data 60L/s @1.0MPa
Rated outlet pressure 1.0MPa
Maximum suction depth 7m
Water diversion device Built-in sliding vane pump
Diversion time Maximum suction depth≤50s
 



5.  Fire monitor: car foam monitor
model PL50
manufacturer China brand
Rotation angle 360° horizontal rotation
Maximum elevation/depression angle Depression angle ≤-15°, elevation angle ≥+45°
flow 50L/S
Range Water≥70m
 
6.Pipe system
Pipe material 316 stainless steel  
Suction pipe There is 1pcs DN150 suction port on the rear side of the pump room
Water injection pipe There are 2 pcs DN80 water injection ports on the left and right sides of the water tank, and 1 pcs DN65 water pump is installed in the pump room to inject water into the tank
outlet pipe There are 1pcs DN65 and 2pcs DN80 water outlets on the left and right sides of the pump room, with stop valve and cover
Cooling water pipe Cooling water line and control valve with cooling power take-off

7.the fire control system
control panel mainly includes the cab control and the pump room control
Additional electrical Set up an independent circuit
Auxiliary lighting The firefighter's room, pump room and equipment box are equipped with lighting lamps, and the operation dashboard is equipped with lighting and indicator lights, etc.
Strobe light Install red and blue strobe lights on both sides of the body, and install a 35W fire searchlight at the rear of the bodywork
Warning device Long row of red warning lights, installed on the top of the cab siren, and its control box is below the front of the driver
Front and rear equipment box aluminum alloy frame.

Fire equipment table:
Serial number name specification Quantity unit Remarks
1 straw 150×4 meters 2 root Threaded
2 Water filter FLF150 1 Piece Threaded
3 Trap FII80/65×3-1.6 1 Piece Internal button
4 Water trap JII150/65×2-1.0 1 Piece Internal button
5 Hose 13-65-20 6 plate Low pressure;
6 Hose 13-80-20 6 plate Low pressure;
7 Reducing interface KJ65/80 2 Piece Internal button
8 Water-retaining cloth DT-SB 4 Piece
9 Hose hook 4 Piece
10 Ground fire hydrant wrench QT-DS1; length 400 1 Piece
11 Underground hydrant wrench Long 860 1 Piece
12 Suction pipe wrench FS100 2 Piece
13 DC switch water gun QZG3.5/7.5; 65 1 support Low pressure;
14 DC Flowering Water Gun QZK3.5/7.5; 65 1 support Low pressure;
15 Foam gun PQ4/0.7Z 1 support
16 Foam pipette 40*2700 1 Piece
17 Fire bucket 1 Pc
18 Fire extinguisher 3㎏ 1 With
19 Fire waist axe Length 390; GF-285 1 Piece
20 Rubber hammer 1 Piece
twenty one Rechargeable portable lighting 1 Piece